1 / 5
| Customization: | Available |
|---|---|
| Beam Angle: | 60° |
| Input Voltage: | 220V |
| No | Power | PCB | Diameter (mm) | Cut size (mm) | Battery | Carton size (cm) | QTY/CTN |
|---|---|---|---|---|---|---|---|
| 1 | 9W | SMD2835-18+34D | 115 | 80 | 1*2200mAh lithium battery | 62*31*50 | 100 |
| 2 | 12W | SMD2835-32+40D | 130 | 95 | 1*2200mAh lithium battery | 69.5*31*29 | 20 |
Cut a hole on the ceiling according to the corresponding lamp size.
Connecting the reserved wire with the lamp line.
Hand on both sides of the spring back to 135 degrees, then embed into the hole.
After installation is completed, turn on the power supply.
Diva Lights